LED electronic wristwatch

Movement model: LED movement
Thickness: 10mm
Dial diameter: 40mm
Table bottom type: ordinary
Mirror material: ordinary glass mirror
Clasp style: Magnet buckle
Buckle material: alloy magnet
Strap material: PU
Dial shape: round
Case material: PU
Debugging method:
①Long press the middle button for 3 seconds in the state of displaying time to enter the time setting mode, the upper hour will flash. At this time, press the middle button once to increase one hour.
②After adjusting the hours, press the middle button for about 3 seconds. The next minute flashes. Press the middle button to add one minute at a time.
③Minutes after debugging. . Press the middle button for about 3 seconds. The year flashes (Y 00 ~ Y that appears at this time represents the meaning of the year) Press the middle button once to increase one year. Just adjust the last 2 digits to 16 years.
④After adjusting the year, press the middle button for about 3 seconds. The upper month starts to flash, press the middle button to add one month at a time. After the month is adjusted, press the middle button for about 3 seconds. The lower date starts to flash, press the middle button Add one day at a time.
⑤After debugging, please do not press any buttons. Automatically exit the setting state
⑥Power saving design without operation for 5 seconds. Automatically enter the sleep state.